加入收藏| 关于我们 您好,欢迎来到济南金日和化工用品生产厂家,免费售后,欢迎咨询!

全国咨询热线:13386411819
0531-81762771

当前位置:首页>>热门资讯>>技术支持>>氨基磺酸对锅炉的除垢使用
联系我们
联系我们

咨询热线:13386411819

QQ:

联系地址:济南市新材料化工市场北区536

氨基磺酸对锅炉的除垢使用
来源:http://www.jnjrh.com 日期:2019-01-18 发布人:admin
众所周知,锅炉运用一段时刻后,锅炉内体水接触面生成钙镁离子水垢(硅酸盐水垢、碳酸盐水垢、硫酸盐水垢),假如长期不清洗水垢,轻着锅炉本体烧不热,重着堵管道气体压力过大,出理重大事故(锅炉爆破)。
It is well known that calcium and magnesium ion scale (silicate scale, carbonate scale and sulphate scale) is formed on the contact surface of the boiler body water after a period of time of boiler operation. If the scale is not washed for a long time, the boiler body is not heated lightly and the gas pressure of the blocked pipeline is too high, the major accident (boiler explosion) is solved.
氨基磺酸除垢剂在锅炉内与硫酸盐和硅酸盐水垢发作化学反应,生成碳酸盐类,而碳酸盐水垢不溶于水,但在转型中会从管壁上脱落下来或变酥松疏散,被除垢剂中的单宁物质分解为水渣,易于用手工或机械清洗下来,然后到达清洗除水垢的意图。
Aminosulfonic acid scale remover reacts with sulphate and silicate scale in the boiler to form carbonate, which is insoluble in water, but will fall off the pipe wall or become crisp and loose during the transformation. Tannin substances in the scale remover will be decomposed into water slag, which is easy to be cleaned by hand or machine, and then reach the intention of cleaning and removing scale.
氨基磺酸除垢适用于工作压力≤13Kg/cm2,蒸发量低于4吨/时的无省煤器和过热器的锅炉,运用前先将除垢剂用80℃左右的热水溶解成20%浓度的溶液,然后给锅炉上水至低可见水位,再把化开的溶液注入炉内,并保持高水位,然后焚烧升温、煮炉,煮炉之后,放完水及时打开人孔、毛孔、查看孔、用手工或压力水龙冲掉存在钢板上的水垢。
Aminosulfonic acid scale removal is suitable for boilers without economizer and Superheater whose working pressure is less than 13Kg/cm2 and evaporation is less than 4 tons/hour. Before application, the scale removal agent is dissolved into 20% concentration solution with hot water of about 80 degrees centigrade, then water is supplied to the boilers to the lowest visible water level, then the boiled solution is injected into the boilers, and the high water level is maintained. Then the boilers are incinerated, heated and boiled. After boiling, the boilers are discharg Open manholes, pores, check holes in time, and wash out scales on steel plates with manual or pressure hoses.
氨基磺酸
氨基磺酸除垢的用量应根据水垢厚度加药。一般水垢1-2毫米厚,加氨基磺酸13-15公斤/吨水:水垢3-4毫米厚,加氨基磺酸15-17公斤/吨水;水垢5毫米以是时,加氨基磺酸17-19公斤/吨水;假如锅炉中水垢较厚,可加氨基磺酸到20-25公斤/吨水。
The dosage of aminosulfonic acid for scale removal should be added according to the thickness of scale. Generally, scale is 1-2 mm thick with 13-15 kg/ton of water added with sulfamic acid: scale is 3-4 mm thick with 15-17 kg/ton of water added with sulfamic acid; when scale is 5 mm, add 17-19 kg/ton of water added with sulfamic acid; if scale in boiler is thicker, add sulfamic acid to 20-25 kg/ton of water.
氨基磺除垢酸清洗时刻一般为5-8个小时,水垢和氨基磺酸药剂产生化学反应,慢慢溶解分解,不会阻塞管道出水孔,直接放出即可。
Aminosulfonate scale removal acid cleaning time is generally 5-8 hours, scale and sulfamate chemicals produce chemical reaction, slowly dissolve and decompose, will not block the outlet of the pipeline, can be released directly.
以上就是氨基磺酸http://www.jnjrh.com为大家介绍的内容,感谢您在百忙之中查看我公司的信息内容,如果您想要了解的更多,欢迎您来电进行咨询!
Above is the content of aminosulfonic acid http://www.jnjrh.com. Thank you for checking our company's information during your busy schedule. If you want to know more, you are welcome to call for consultation!